+ Reply to Thread
Results 1 to 2 of 2

Thread: The Amplifier with Three Channel Output Distribution

  1. #1
    Join Date
    Jul 2017
    Posts
    1

    Default The Amplifier with Three Channel Output Distribution

    Good day
    The three channel output distribution amplifier uses a single LMX324. The first stage is capacitivley coupled with a 1.0 F capacitor. The inputs are at VCC rail or 2.5 V. A voltage gain of 10 (1 MΩ/100 kΩ) is obtained in the first stage, and the other three stages are connected as unity-gain voltage followers. Each output stage independently drives an amplifier through the 50 F output capacitor to the 5.1 kΩ load resistor. The response is flat from 10 Hz to 10 kHz.
    The datasheet of LMX3324
    7.6.3.jpg

  2. #2
    Join Date
    Jan 2018
    Posts
    1

    Default

    This is a great post, so thanks for sharing this tutorial data.. I will visit your site regularly for some of the most recent posts.

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts