Pioneer Stereo Receiver Model SX-1010

 

Home Forums Pioneer Gallery Vintage Audio Gallery Galleries E-mail

 

Vintage Pioneer Stereo Receiver Model SX-1010

 

Pioneer Stereo Receiver Information

 

 

Pioneer AM/FM stereo receiver model SX-1010. Rated at 100 watts RMS per channel into 8 ohms. Top of the line for the "black out dial" series. Features tone on/off which turns off the bass, treble controls, tape duplicate switch, FM muting on/off FM multipath, Adaptor on/off which allows you to hook an equalizer up etc. Dolby Nr switch, Mic left right in puts, Mic switch, two tape in/outputs, one aux input, two phono inputs, and both tuning and signal meters. Neat stereo receiver.

 

Specifications:

Power Output: 100 watts per channel RMS into 8 ohms, 110 watts into 4 ohms.
Harmonic Distortion: Less than 0.1%
Intermodulation Distortion: Less than 0.1%
Damping Factor: >30
Hum and Noise: >-110dB
Frequency Response: 7Hz to 100kHz

FM Sensitivity: 1.7uV
FM Signal to Noise Ratio: 72dB
IF Rejection: 110dB
Spurious Rejection: 110dB
Harmonic Distortion Mono: <0.2%
Harmonic Distortion Stereo: <0.3%
Stereo Separation: 40dB

 

 

 

Pictures